When you come to the end of your rope, tie a knot and hang on. ~Franklin D. Roosevelt
Choose your woodworking tools and equipment carefully if you live in a small space such as an apartment. You can still enjoy completing woodworking projects, but might have to forgo the 14-inch band saw. Pick tools that will do what you need but don’t take up too much space. The most accurate, effective and important tool you have in your arsenal will always be your brain. If you are thinking about anything else but the work you are doing, your distraction may cause you injury. Pay attention to the job at hand and let all of your other stresses go. Make sure that your blade is in good condition before you begin sawing. Dull blades make work harder, plus they are a safety hazard, especially on power saws. Additionally, dull blades can cause you to make errors that can cost you money.
Use stop blocks to your advantage for more accurate work. When cutting a lot of pieces the same size, no matter how carefully you measure, you often find small variations. Use a pre-cut stop block to make those measurements pinpoint accurate. Then the table saw will stop at just the right length length.
When you are new at woodworking and starting to collect your tools, purchase simple tools to begin with. Try your hand at a few projects to make sure you want to continue before you invest in expensive tools. You can save money and get better quality tools when you buy used tools.
Organize your shop’s extension cords to keep your shop safe and tidy. You can make your own cord keeper with nothing more than a scrap piece of wood. Simply cut a piece of wood in the shape of an I and wrap each of your extension cords around the wood.
Working with a table saw can be quite dangerous for people that have long hair. If you are one of these people, it would be a good idea for you to tie your hair up while you work. You don’t want any of your hair to get caught in the blades. Only cut using sharp tools. Older and dull tools result in tear-outs and even chipping, which is frustrating and a waste of time. Sharp tools means you get clean cuts quickly. You’ll also spend a lot less time sanding things to get just the right look and fit that you need.
When staining woods, always test in a hard to see area before moving forward. In fact, if you’ve got a piece of scrap wood, that’s even better. You never know how a type of wood will take to stain, so it’s best to find out in a place that won’t be an issue later on. Woodworking is an amazing way to better your hand-eye coordination while building useful life skills. From learning to measure to understanding how tools operate, this pastime truly betters you as a person. To learn more about how to make woodworking even more enjoyable, continue reading this article and the tips therein.
Before you cut into a piece of wood, you need to inspect it to make sure there are not any pieces of metal in the wood. Screws, nails, staples and other metallic object will not only damage your blades, but also pose a safety hazard. Always inspect the wood before you cut. Clean tools last longer; therefore, it is important to clean your tools after each use. Dip a shop rag into a small amount of acetone and wipe each tool to remove any build-up. Afterwards, dip a different shop rag into machine oil and wipe the metal of each tool to help prevent rusting.
Unless you are using an orbital sander, do not sand across the grain. Sanding with the grain is much more effective. It will also give your finished woodworking project a more professional appearance. Sanding is an important part of your project, and it is a good idea to get it right.
If you mark your intended cuts with pencil lines, try not to actually cut them! You might be lined up at first, but it is possible to get a little off later in the cut, resulting in pieces that fit less that perfectly. It’s better to cut the edge of the pencil line and then sand the rest of the marking off.